-
- Control panels
Anticondensating heater
- Dehumidification- and cabinet heat elements are used for heating and drying of confined spaces, where the risk of low temperature is present, or for equalizing temperature fluctuations to avoid formation of condensation in electric systems.
- Read more
-
- Temperature sensors
Cable Sensors
- ACCURACY: According to IEC 751 class B
- Read more
-
- Control panels
Cirrus 40
- Features: High power to size ratio (50 – 230W) Multipile voltage options available Lightweight Pre-wired Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Finger guard on either end Smartcon® cable enables connecting the DC fan to 12/24V AC Air filter* When specifying 12V fan, select either AC or DC operation. For 24V fan operation, AC…
- Read more
-
- Control panels
Cirrus 60
- Features: High power to size ratio 115V or 230V available Lightweight Three power options in a single unit (200W, 300W, or 400W) Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Side mounting bracket for wall mounting (4xM4) Bulkhead mounting bracket for floor mounting (4xM4) Matching Accessories: Inline Thermostat, Thermostats (FGT100, FGT200), Dualstat (FGDT Series)
- Read more
-
- Control panels
Cirrus 80
- Features: High power to size ratio (300 – 800W) 115V or 230V available Lightweight Screw terminals for easy wiring Dual power feature Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Air Filter* *Typical power reduction of 10% when 30 PPI filter fixed.
- Read more
-
- Control panels
Cirrus Series
- Cirrus fan heaters use positive temperature coefficient (PTC) ceramic heating technology, ideally suited for climate control. The heaters can be controlled independently from the fan, allowing a ‘fan-only’ mode for air circulation. Combined with corresponding accessories, the broad range of self-regulating PTC fan heaters are suitable products for many applications. Cirrus fan heaters are proven to be safe through given…
- Read more
-
- Mould heating
Duct heater
- Duct heaters are used for air conditioning systems, heat recovery systems and ventilation systems as well as in process plants with a need for heating specific gases. Standard designs maximum air/gas temperature +70ºC. Standard electrical heater intended for mounting in ducts connection with air conditioning system, heat recovery systems and ventilation systems. The duct part is made of hot-galvanized steel…
- Read more
-
- Control panels
Fan filter
- Mounting without screws in square openings as indicated in the cut-out diagram. Plate thickness between 1.5 and 2.2 mm Possible fixing with V-shaped head screws (nor supplied) Fan Filters FPF-series The “FPF” fan-filter units are the outcome of our accumulated experience gained in the field of control cabinet ventilation. Thanks to their particular design, they meet the needs of…
- Read more
-
- Fan heating, Nacelle heating
Fan Heating
- Cirrus is a range of fan heater units utilizing PTC heating technology. The broad range of types, combined with corresponding accessories, offers the appropriate priduct for many applications. The use of high-grade components ensures highest operational reliability within the corresponding application. Self regulation through PTC characteristics Proven safety based on pre-adjusted limitation of temperature High reliability Compact design through high…
- Read more
-
- Heating blankets
For PHBC Systems
- Heating blankets for PHBC systems. All blankets are marked with resistance value, batch no., sensor marking, indication of heat wire placement. They have built-in safety limiters of 120ºC (248ºF), PT100 sensors and up to 10 mtr. power- and sensor cable. The heating blanket will be supplied with a short sleeved cable with plug and a multi cored extension cable to the…
- Read more
-
- Heating blankets
For tip with silicone surface
- Lund & Sorensen A/S heating blankets for tip, are specially designed for curing the leading and trailing tip of wind turbine blades. These heating blankets operate at a stable temperature of approximately 60°C, when mounted currectly on the blade tip. Once the tip have been cured, ground and polished, it is possible to carry out any required procedures with no…
- Read more
-
- Drum- & Container heaters
HBD Base Drum Heater
- The most robust of all of our drum heating products, the HBD base drum heater is the ideal heating solution for the toughest industrial environments. suitable for 200l drums and aggressive heating applications robust steel construction heat over platen area ip40 protection 0-150°c thermostat 2 metre armoured power cable
- Read more
-
- Drum- & Container heaters
Heat Solutions Drum Lids
- Heat Solutions’ Drum Lid range delivers 200/220L drum compatible lids for all heating and market demands. suitable for both steel and plastic 200/220l drums. lightweight & durable. overlapped skirt makes the lid easy to fit whilst reducing heat losses. reduces process heating cycles. option for branding on top of lid.
- Read more
-
- Heating blankets
Heating blanket with thermostat
- Heating blanket with digital precision thermostat. This new generation of heating blankets is developed based on inputs from blade manufactures and blade repair companies and inputs from education and research institutes. Our aim was to develop a blanket suited as a tool for high quality repairs. To ensure a perfect curing, we have added our new digital thermostat, with display. It…
- Read more
-
- Infrared Temperature Sensors
HIBC/A Silicone Mat Heater
- Utilising high quality, handmade, wire wound heating technology, the HIBC/A silicone mat heater is an effective solution for heating any product contained in a bag-in-box intermediate bulk container (IBC). silicone rubber class ii double insulated construction 0-150˚c electronic controller in-built residual current device bespoke sizes made to order integral positive temperature coefficient (ptc) sensor drop in/removable base heater
- Read more
-
- Infrared Temperature Sensors
HIBC/B – Container Heaters
- HIBC/B - Container Heaters All HIBC container heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly. It is advised that power to the heater jacket be disconnected when the container is either empty or being filled, or upon installation or removal of the heater itself. It is recommended that the unit be…
- Read more
-
- Drum- & Container heaters
HIJD Insulated Jacket
- The HIJD Insulated Jacket can be used to maintain hot and cold. The HIJD provides a cost effective method of reducing thermal transfer. easy installation flap for filler access bespoke sizes made to order water resistant can be used at the same time as HBD and after the HSSD and HISD standard sizes to fit 25l, 50l, 105l, 205l &…
- Read more
-
- Infrared Temperature Sensors
HISD Side Drum Heater
- The HISD Side Drum Heater is an easy-to-fit, efficient and effective insulated heating jacket solution for all types of plastic and steel drums. Suitable for both plastic drums and steel drums (gentle warming on steel drums to be expected) Class ii double insulated product ip40 protection Bespoke sizes made to order Adjustable quick release buckles for easy fit 0-40°c or…
- Read more
-
- Drum- & Container heaters
HSHP Drum Heater
- High levels of performance, powerful heating capabilities and unrivalled durability – the hshp is the latest and leading heater jacket in the heat solutions range. PTFE material delivers eu and us regulatory standards for use with food stuffs high levels of chemical and acid resistance easy clean hygienic heater solution lightest heater jacket on the market standard power availability 1800w…
- Read more
-
- Infrared Temperature Sensors
HSSD Silicone Drum Heater
- A flexible and aggressive heating solution for metal drums, the HSSD silicone drum heater provides uniform thermal transfer across the heating face. suitable for metal drums and aggressive heating applications silicone rubber double insulated construction ip40 protection bespoke sizes made to order simple spring fixing moisture and chemical resistant 0-90°c, 0-120°c or 0-180°c thermostat standard sizes to fit 25l, 50l,…
- Read more
-
- Drum- & Container heaters
HTSD High Temperature Drum Heater
- Designed to be powerful, robust and thermally efficient, the HTSD Drum Heater provides a higher power alternative to the HISD Drum Heater for metal drums and containers. suitable for metal drums and aggressive heating applications class ii double insulated product ip40 protection bespoke sizes made to order adjustable, quick release buckles for easy fit high operating temperature of up to…
- Read more
-
- Control panels
Hygrostat
- To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
- Read more
-
- Gear & oiltank heating
Immersion heaters
- HIGH quality . Custom design . Approvals . Long life Heating of: Gearoil Hydraulic Oli Glycol Water
- Read more
-
- Infrared Temperature Sensors
IR Temperature Sensor
- We are able to offer the widest range on the market, in which custom-designed displays allow you to connect multiple devices and display the temperature digitally and graphically while allowing for data collection. Smartphone technology is also used in IR temperature measurement which allows for viewing of the temperature on a smartphone via NFC wireless technology. IR temperature sensors for…
- Read more
