• Anticondensating heaterQuick View
    • Anticondensating heaterQuick View
    • Anticondensating heater

    • Dehumidification- and cabinet heat elements are used for heating and drying of confined spaces, where the risk of low temperature is present, or for equalizing temperature fluctuations to avoid formation of condensation in electric systems.
    • Read more
  • Cable SensorsQuick View
  • Cirrus 40Cirrus 40Quick View
    • Cirrus 40Cirrus 40Quick View
    • Cirrus 40

    • Features: High power to size ratio (50 – 230W) Multipile voltage options available Lightweight Pre-wired Separate fan operation capability   ​Options: Mounting: 35mm DIN rail clip (EN60715) Finger guard on either end Smartcon® cable enables connecting the DC fan to 12/24V AC Air filter*   When specifying 12V fan, select either AC or DC operation. For 24V fan operation, AC…
    • Read more
  • Cirrus 60Cirrus 60Quick View
    • Cirrus 60Cirrus 60Quick View
    • Cirrus 60

    • Features: High power to size ratio 115V or 230V available Lightweight Three power options in a single unit (200W, 300W, or 400W) Separate fan operation capability   Options: Mounting: 35mm DIN rail clip (EN60715) Side mounting bracket for wall mounting (4xM4) Bulkhead mounting bracket for floor mounting (4xM4)   Matching Accessories: Inline Thermostat, Thermostats (FGT100, FGT200), Dualstat (FGDT Series)  
    • Read more
  • Cirrus 80Quick View
    • Cirrus 80Quick View
    • Cirrus 80

    • Features: High power to size ratio (300 – 800W) 115V or 230V available Lightweight Screw terminals for easy wiring Dual power feature Separate fan operation capability   Options: Mounting: 35mm DIN rail clip (EN60715) Air Filter* *Typical power reduction of 10% when 30 PPI filter fixed.  
    • Read more
  • Cirrus SeriesQuick View
    • Cirrus SeriesQuick View
    • Cirrus Series

    • Cirrus fan heaters use positive temperature coefficient (PTC) ceramic heating technology, ideally suited for climate control. The heaters can be controlled independently from the fan, allowing a ‘fan-only’ mode for air circulation. Combined with corresponding accessories, the broad range of self-regulating PTC fan heaters are suitable products for many applications. Cirrus fan heaters are proven to be safe through given…
    • Read more
  • Duct heaterQuick View
    • Duct heaterQuick View
    • Duct heater

    • Duct heaters are used for air conditioning systems, heat recovery systems and ventilation systems as well as in process plants with a need for heating specific gases. Standard designs maximum air/gas temperature +70ºC. Standard electrical heater intended for mounting in ducts connection with air conditioning system, heat recovery systems and ventilation systems. The duct part is made of hot-galvanized steel…
    • Read more
  • Fan filterQuick View
    • Fan filterQuick View
    • Fan filter

    • Mounting without screws in square openings as indicated in the cut-out diagram. Plate thickness between 1.5 and 2.2 mm Possible fixing with V-shaped head screws (nor supplied)   Fan Filters FPF-series The “FPF” fan-filter units are the outcome of our accumulated experience gained in the field of control cabinet ventilation. Thanks to their particular design, they meet the needs of…
    • Read more
  • Fan HeatingQuick View
    • Fan HeatingQuick View
    • ,
    • Fan Heating

    • Cirrus is a range of fan heater units utilizing PTC heating technology. The broad range of types, combined with corresponding accessories, offers the appropriate priduct for many applications. The use of high-grade components ensures highest operational reliability within the corresponding application. Self regulation through PTC characteristics Proven safety based on pre-adjusted limitation of temperature High reliability Compact design through high…
    • Read more
  • For PHBC SystemsQuick View
    • For PHBC SystemsQuick View
    • For PHBC Systems

    • Heating blankets for PHBC systems. All blankets are marked with resistance value, batch no., sensor marking, indication of heat wire placement. They have built-in safety limiters of 120ºC (248ºF), PT100 sensors and up to 10 mtr. power- and sensor cable. The heating blanket will be supplied with a short sleeved cable with plug and a multi cored  extension cable to the…
    • Read more
  • For tip with silicone surfaceQuick View
    • For tip with silicone surfaceQuick View
    • For tip with silicone surface

    • Lund & Sorensen A/S heating blankets for tip, are specially designed for curing the leading and trailing tip of wind turbine blades.  These heating blankets operate at a stable temperature of approximately 60°C, when mounted currectly on the blade tip.  Once the tip have been cured, ground and polished, it is possible to carry out any required procedures with no…
    • Read more
  • HBD Base Drum HeaterQuick View
    • HBD Base Drum HeaterQuick View
    • HBD Base Drum Heater

    • The most robust of all of our drum heating products, the HBD base drum heater is the ideal heating solution for the toughest industrial environments. suitable for 200l drums and aggressive heating applications robust steel construction heat over platen area ip40 protection 0-150°c thermostat 2 metre armoured power cable  
    • Read more