Windpower

Nacelle fan heaters

REQUEST

Fan heaters for frost protection in wind turbines.

Nacelle Heaters from Lund & Sorensen A/S are special designed for cold climate applications inside the nacelle and tower. The Heater is rigid and reliable designed when harsh performance are required. The Heater can be supplied with either 400V or 690V. The control of the Heater must be done externally.

Do you have questions or need advice and guidance? Contact technical support.

Overheating protection

The Fan Heater is equipped with an overtemperature protection switch in order to prevent damage in case air flow is disrupted. If the temperature rises above 120°C inside the terminal box the switch will activat and cut off the power to the heating elements and the motor. The thermal switch has to be manually reset.

Electrical installation

Installation must be carried out with a multipoled contact breaker with a contact space measuring at least 3 mm per pole. Permanent installation must always be performet by an authorised electrician in accordance with current regulations. Only the electrician has knowledge of current regulations. The terminals are accessible if the screws and the plate on the right and left side are removed.